2 Rib Cold Rolled Ribbed Wire Machine
This Cold-rolled ribbed steel bar production line is to roll the surface of the steel coil round bar to form two crescent sides.
The raw material is a hot-rolled low-carbon steel round bar.
Usage: This production line mainly rolls diameter 5—14mm and ordinary low-carbon steel or low-alloy steel bars through multiple cold rolling and ribbing rolling, which finally forms reinforcing steel bars with three-sided crescent-shaped ribs. It’s widely used in highway, airport, irrigation works, city planning, and construction engineering.
Video of 2 Rib Cold Rolled Ribbed Wire Machine
Features of 2 Rib Cold Rolled Ribbed Wire Machine
1. This device adopts a PLC touch screen numerical control system to make the operation easier and a higher degree of CNC.
2. The production line adopts the most advanced international frequency conversion and servo technology or independent frequency conversion control technology, and it effectively protects the power transmission system and equipment from damage. It maximizes the service life of the machine. It can save electricity 30-40%, the maximum line speed can reach 190 meters, increase production efficiency by more than 40%.
3. We adopt a self-developed reducer as the national patented product, which is the fastest speed in China, simplifies the structure of the production line, and makes the equipment more reasonable and compact. (The speed reducer between the main reducer and the main rolling mill is omitted and the deceleration is reduced.) Due to the long transmission distance of the machine and many problems connecting the flanges, it effectively improves the transmission efficiency by more than 30% and improves the stability of the equipment by more than 60%. It effectively improves the production efficiency of the equipment.
4. Straightening machine adopts multiple rounds of synchronous control technology. The straightening effect is good. Less damage to steel bars.
5. Cutting off adopts independent research and development of variable frequency or servo flying shear control system, easy to operate. The high degree of CNC, low failure rate, cut-off error low.
Main Parameter of 2 Rib Cold Rolled Ribbed Wire Machine
| Model | LZ-50000T |
|---|---|
| Max. diameter before processing | Max. 14mm |
| Finished diameter | Max. 13mm |
| Cutting length | 1-12m |
| Max. speed for finished coil taking-up | Max. 190M/min |
| Max. speed for finished straightening & cutting | Max. 120M/min |
| Host speed control | frequency conversion adjust the working speed |
| Control Technology | Touch screen +PLC+ Encoder |
| Power | 110kw+11kw +2kw |
| Steel falling way | The spiral turns into two sides |
Finished Product of 2 Rib Cold Rolled Ribbed Wire Machine
Through the cold rolling of the ordinary hot-rolled coil garden rebar (Q235) and induction tempering to achieve “high-ductility cold-rolled ribbed rebar”, CRB600H, CRB650H, and CRB800H rebars can be produced, so that the elongation rate of the cold-rolled ribbed rebar is greatly increased. Improve the use of cold-rolled ribbed steel.
