Automatic welded fence panel machine is our company’s integrated fence mesh production line and designed an integrated automatic welding production line.
Including automatic wire feeding, automatic bending, automatic stacking, and automatic output functions.

Note: We can design the fence panel welded machine according to your wire diameter, mesh hole size, and mesh width.
We also have manual 3D fence panel welders and 358 anti-climb fence welded machines.

Wire feeding device
The line wire is fed by an automatic feeding funnel.
The weft wire is fed from the funnel by a stepping motor. Accurate, save time and effort.

The main welding machine is a device that pressurizes and energizes the positioned vertical and horizontal lines to form solder joints.

1. The welding controller independently researched and developed by our company corresponds to the resistance welding transformer one-to-one. It adopts thyristor synchronous control, which can realize the simultaneous welding or separate control welding of the transformer.
2. Equipped with horizontal line detection device to ensure the accurate position of horizontal line drop.
3. The electrode block adopts chromium zirconium copper with hardness HRB ≥ 78 and conductivity ≥ 50 MS/m to improve utilization.
4. The host adopts a water-cooled circuit to prevent the electrode from being deformed by heat and prolong the life of the electrode.

Servo pull mesh device

• The servo pull mesh mechanism pulls the welded horizontal lines out of the grid according to the parameters set by the program, and according to the length of the net piece, the net can be pulled back and forth many times, so that the entire net piece is completely pulled out.
• The net-drawing trolley adopts racks traction drive and is driven by a 3.8kw servo motor. The net-drawing speed is about 0.6m/s, the maximum idle speed is 1.5m/s, and the maximum stroke is 4.0m.

The control system is equipped with 2 main control cabinets

• Adopt PLC programmable control system, touch screen operation interface.
• Each functional structure is equipped with a fault detection device and an automatic alarm and shutdown function.
• The mesh specifications and the operating parameters of each mechanism are set through the touch screen interface.
• The welding current and time are set by the steel mesh welding controller on the main control cabinet.