Wire Mesh Welding Machine DP-FP-3000BN
DAPU Factory designs and manufactures Wire Mesh Welding Machine DP-FP-3000BN, and uses welding 3-8mm steel bars. This type of machine is fully automatic for the production of construction mesh in sheets, and easily managed by 2 operators!
The wire mesh welding machine used European Welding technology and Foreign brand equipment. High precision, not easy to damage.
Intelligent control system, PLC+touch screen setting parameter specifications, human-computer interaction mode, simple operation.
The production line is modular and can be upgraded according to the customer’s budget and automation level requirements.
Machine Specification
| Model | DP-FP-2500BN+ | DP-FP-3000BN+ | DP-FP-2500BM |
|---|---|---|---|
| Max. mesh width | 2500mm | 3000mm | 2500mm |
| Line wire dia(coil) | 3-8mm | 3-8mm | 4-10mm |
| Cross wire dia(Pre-cut) | 3-8mm | 3-8mm | 4-10mm |
| Line wire space | 100-300mm | 100-300mm | 100-300mm |
| Cross wire space | 50-300mm | 50-300mm | 50-300mm |
| Max.mesh panel length | 6m+ | 6m+ | 6m+ |
| Max. mesh roll length | Max. 100m(3-6mm) | Max. 100m(3-6mm) | Max. 100m(4-6mm) |
| Max. welding speed | 80-100 times/min | 80-100 times/min | 80-100 times/min |
| Welding electrodes | 24pcs | 30pcs | 24pcs |
| Welding transformer | 150kva*6pcs | 150kva*8pcs | 150kva*12pcs |
| Weight | 12T | 15T | 15T |
Complete production line Layout
The complete production line must include: line wire payoffs, straightening banks, accumulation, line wire feeder, welding Unit, crosswire feed, mesh linear pullout, mesh shear, stacking & turning mesh, transport.
Line wire feeder
●Longitude wires are fed from wire pay-off (bear 1T) automatically, then through the first straight setting roller device. The wire storage device can feed the longitudinal wires step by step, then through a second straight setting roller device.
Cross wire feeder
●Cross wires should be pre-straightened and cut, then the workers put the cross wires on the cross wire storage device, which can bear a maximum of 1t of wires. Then the stacker can rotate and transport cross wires into the hopper device continually. The cross wire falling is controlled by a step motor, precise.
Welding system
●The upper copper arm connects two welding electrodes, the Copper plate connects the lower electrode base and welding transformers, much easier for electric conduction.
●One welding electrode is controlled by one SMC 80 air cylinder, with high power, high welding speed.
●Cast water-cooling welding transformers, high efficiency. The upper arm and lower electrode base are water-cooling types. PLC adjusts the welding degree.
Mesh shear
●The mesh cutting is automatic. You can set the cutting length on the touch screen by PLC.
Stacking & turning mesh & transport
●After mesh cutting, the mesh max.6m can be stacked by the mesh stacking machine.
●If necessary, it can be equipped with a turning mesh system to save transportation space
●Then the finished mesh can move out automatically.
Application
Concrete reinforcement
Rod steel bar mesh
Bridge rebar mesh
Fence panel
Storage cage
Poultry cage
